Gas leakage is one of the common and important safety risks in industrial environment. In oil and gas, chemical manufacturing, energy production, mining, sewage treatment and other industries, there may be a variety of dangerous gases at the same time. Flammable gas leakage, toxic gas exceeding the standard and anoxic environment will all pose a serious threat to personnel safety, equipment operation and production process.

For these complex industrial environments, single gas detection equipment often cannot meet the safety monitoring requirements. The fixed multi-gas detector can monitor the concentration of multiple gases at the same time and provide timely warning before dangerous situations occur.

HIREP HRP-T2000-G fixed multi-gas detector is specially designed for industrial scenes that need continuous on-line gas monitoring. The equipment can be equipped with a variety of gas sensors according to application requirements, which can realize real-time detection, alarm prompt and data transmission of industrial system, and provide reliable guarantee for industrial safety.

Internal chain products:

Fixed Multi-Gas Detector HRP-T2000-G

Link:

https://www.hirepsafety.com/products/fixed-gas-detector-en/fixed-multi-gas-detector-hrp-t2000-g.html

Why do industrial sites need multi-gas monitoring?

There is more than one gas risk in many industrial scenarios.

For example:

• There may be risks of methane leakage and hypoxia in oil and gas facilities;
• Combustible gas and toxic gas may exist in chemical plants at the same time;
• Sewage treatment plants may produce methane and hydrogen sulfide;
• There may be a risk of volatilization of various chemical gases in the storage area.

The traditional single gas detection scheme usually needs to install multiple independent detection devices, which not only increases the installation cost, but also increases the complexity of wiring and the difficulty of later maintenance.

Multi-gas detection scheme can monitor multiple dangerous gases at the same time through one device, reducing the number of devices, improving monitoring efficiency and reducing the complexity of industrial safety system.

How does the fixed multi-gas detector work?

Stationary multi-gas detectors are usually installed in important areas where gas leakage may occur, such as:

• Near production equipment;
• Gas pipeline area;
• Around the storage tank;
• Chemical production areas;
• Compressor room;
• Industrial workshop.

The equipment continuously collects ambient air through sensors. When the target gas enters the detection range, the sensor will convert the gas concentration into an electrical signal.

The internal processing system of the detector analyzes the data and displays the current gas concentration through the display screen. When it is detected that the gas concentration exceeds the preset alarm value, the equipment will start:

• Sound and light alarm;
• Relay output;
• External control system linkage.

This can help the staff to find the danger quickly and take corresponding safety measures.

Advantages of HRP-T2000-G fixed multi-gas detector

The fixed multi-gas detector HRP-T2000-G provides an efficient and safe solution for the industrial environment that requires simultaneous monitoring of multiple gases.

Multi-gas detection capability

The detector supports the selection of different sensor combinations according to different application requirements.

Detectable gases include:

• Combustible gas;
• Methane (CH₄);
• Carbon monoxide (CO);
• Hydrogen sulfide (H₂S);
• Oxygen (O₂);
• Ammonia gas (NH₃);
• VOC volatile organic gases;
• Other industrial hazardous gases.

Through the combination of multiple sensors, one device can cover multiple gas risks, effectively reducing the number of installations and maintaining good monitoring results.

All-weather continuous online monitoring

Unlike portable gas detectors for personal protection, fixed gas detectors are usually installed in designated areas for long-term continuous operation.

HRP-T2000-G can continuously monitor for 24 hours and find the change of gas concentration in real time, which is especially suitable for unattended areas and industrial places that need long-term safety management.

Convenient connection with industrial control system

Modern industrial production pays more and more attention to centralized safety management.

HRP-T2000-G supports a variety of industrial communication modes, including:

• 4-20mA analog signal output;
• RS485 communication;
• Relay alarm output.

Connectable:

• Gas alarm controller;
• PLC system;
• DCS control system;
• Industrial data monitoring platform.

Help enterprises to establish a complete gas safety monitoring network and realize centralized management and remote monitoring.

Application field of fixed multi-gas detector

Oil and gas industry

There are many potential leakage points in oil and gas facilities, such as pipelines, valves, storage tanks and production equipment areas.

The fixed multi-gas detector can continuously monitor the concentration of combustible gas and toxic gas, helping to reduce the risk of fire, explosion and personnel poisoning.

Chemical manufacturing industry

Chemical plants usually involve all kinds of dangerous chemicals.

Gas detection equipment can be deployed in production areas, storage areas and chemical treatment areas to continuously monitor dangerous gases and improve production safety.

Sewage treatment plant

Dangerous gases such as methane and hydrogen sulfide may be produced during sewage treatment.

The installation of fixed gas monitoring equipment can detect the accumulation of dangerous gas in time and protect the safety of workers in daily operation and maintenance.

Industrial production workshop

Some manufacturing processes may produce flammable or harmful gases.

Stationary gas detectors can be installed in production lines, equipment rooms and near confined spaces to monitor abnormal gas concentrations in real time.

Difference between fixed gas detector and portable gas detector

Both fixed and portable gas detectors are important detection equipment in industrial safety, but their application methods are different.

For industrial areas that need long-term continuous monitoring, the fixed multi-gas detection scheme is usually more suitable.

Using reliable gas monitoring scheme to improve industrial safety

Gas detection is an important part of modern industrial safety management. Choosing appropriate testing equipment can help enterprises find potential risks earlier, reduce the probability of accidents and improve the safety of production environment.

HIREP HRP-T2000-G fixed multi-gas detector provides a reliable solution for industrial scenes that need to monitor multiple gases at the same time. With continuous detection capability, flexible sensor configuration and industrial communication function, the equipment can help enterprises to establish a safer and more efficient gas monitoring system.

Learn more about multi-gas monitoring solutions, please visit:

Fixed Multi-Gas Detector HRP-T2000-G