Blog

HRP-SC06 Household smoke carbon monoxide alarm, with double protection against fire and invisible toxic gas.

10/29 2026

Fire and carbon monoxide are the two most dangerous hidden dangers in residential and small commercial places. The smoldering fire will quietly produce smoke, while carbon monoxide is colorless and tasteless, which can’t be detected by human senses. A single type of detector can only guard against one risk, leaving a blind spot in security protection. HRP-SC06 two-in-one smoke-sensing carbon monoxide compound alarm integrates smoke sensing and electrochemical carbon monoxide detection in a compact device, providing double early warning for families, serviced apartment, homestays and small shops.

Smoke-CO HRP-SC06-Front

HRP-SC06 adopts photoelectric smoke sensor with high performance electrochemical carbon monoxide sensor. Photoelectric sensors are sensitive to smoldering smoke generated by mattresses, cables and furniture, and can capture danger signals in the early stage of fire. The electrochemical carbon monoxide sensor monitors the carbon monoxide released by gas water heaters, heating stoves, fireplaces and generators, with stable readings and strong anti-environmental interference ability. The equipment has its own LCD display screen, which can display the real-time status and carbon monoxide PPM concentration value, and users can directly view the field gas data without additional instruments.

The equipment distinguishes smoke alarm and carbon monoxide alarm signals through different sound rhythms and flashing modes of indicator lights. When smoke triggers a fire alarm, the alarm gives out a continuous prompt sound; When the concentration of carbon monoxide exceeds the safety threshold, it is switched to an independent CO alarm mode. This design is convenient for indoor personnel to quickly judge the type of danger and take targeted measures: evacuate in time when the fire occurs, and open the window for ventilation when the carbon monoxide exceeds the standard. The panel is equipped with a special self-test button, so that users can perform self-test regularly to check whether the buzzer, indicator light and sensor circuit are working normally, so as to avoid long-term failure of the equipment without being aware of it. Three status indicators respectively display power supply, alarm and fault status, which simplifies daily inspection work.

The working temperature range of HRP-SC06 is -10℃ to 40℃, which is suitable for most indoor environments. The equipment supports ceiling-mounted or wall-mounted installation without hard wiring. The fuselage is light, which can be quickly installed with supporting mounting brackets. Residents can install it themselves, and property operators are also suitable for batch layout. When no one is present, it still keeps continuous monitoring for 7×24 hours. For homestays and rented houses with frequent personnel flow, a HRP-SC06 can replace independent smoke detectors and carbon monoxide alarms, saving installation space and reducing procurement and maintenance costs.

Common installation locations include living room, bedroom, corridor, kitchen, garage and boiler room. Many accidents occur during people’s sleep at night, and the risks caused by oil smoke, low-temperature smoldering and incomplete combustion of heating equipment can easily not be discovered in time. HRP-SC06 makes up for the protection short board of single-function detector, does not depend on external mains supply, and can still work continuously after power failure, which is especially critical in fire and gas accident scenes.

 

Home Tel Mail Inquiry